cab540a650 you have to be very careful here so as not to damage the defroster wires. 4 Start peeling the window film. Black plastic large trash bag. Method 5 Soaking and Scraping If you're unable to use the other methods, or if there is a small area of tint, this method can be used (although it is time-consuming). After a single bubble appears, many more will follow. 3. Following is a list of all that you will need to begin the tint removal process: Black Trash Bags Ammonia (undiluted) Super-Fine Steel Wool Razor Blade or Sharp Knife Windex Glass Cleaner 3 hours of time Nice hot sunny day 1.Begin by slicing out two window-shaped sheets from the black trash bags.
If you attempt to remove the window tint simply by peeling, you'll probably end up with a sticky mess on the glass that will take several hours to scrape. You may use the steel wool to clean up any remaining adhesive left from scraping. and test pull a corner. Ad Steps Method 1 Sun and Ammonia This technique requires a sunny day. Press hard so that the glue sticks to the towel, rather than balling up or smearing. Fresh razor blade, patience and some skill will get the film off (bigger pieces are better). How To: Clean an SKS Rifle . for the side windows the job is fairly easy, a good razor blade and some patience does nicely. Worthwhile to spend more time soaking all the film than starting to scrape it off, so get all the windows soaking before doing the next step. Lift the window film starting from the corner with either a razorblade or just your fingernail, and peel it away all in one go if possible.
Garcmegha replied
462 weeks ago